1 / 7
Laptop Docking Stations & Port Replicators
Axagon HMA-CR3A Metal USB 3.2 Gen 1 Multiport Hub with Three USB-A Ports and a Card Reader
View reviewsMetal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-CR3A connects up to three USB devices to a laptop or computer and also adds an SD / microSD card reader. The hub's metal casing is made of...
CHF 17.43
Delivery time: 3–5 working days
- Fast delivery from a Swiss warehouse
- 3-year warranty
- Personal support
-
- Invoice (CH)
Product information
Metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-CR3A connects up to three USB devices to a laptop or computer and also adds an SD / microSD card reader.
The hub's metal casing is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant, finely textured housing surface resists fingerprints. Rubber pads prevent it from sliding on the table. The permanently installed 20 cm USB cable is ideal for mobile device users.
This compact multiport hub can also handle the permanent connection of multiple external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub also charges phones and tablets with a current of up to 1.5A/5V. This means the hub can easily charge an Android smartphone, Apple iPhone, Apple iPad, etc.
The card reader supports all current versions of SD and microSD cards, including SDXC and microSDXC, with a capacity of up to 2TB. High data transfer speed is ensured by the USB 3.2 Gen 1 interface. The card reader allows simultaneous handling of cards in both slots and direct copying between them.
The USB multi-port hub is the ideal accessory for Ultrabooks with a low number of USB-A ports and no card reader. The hub doesn't even shy away from connecting to phones using an appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard, mouse, and card reader to your phone or tablet.
Input:
• 1x USB 3.2 Gen 1 / SuperSpeed USB Port, USB-A Male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• USB connector with A-type male plug, located on a 20 cm fixed cable.
USB Output:
• 3x SuperSpeed USB Port, USB-A Female connector.
• Support for transfer speeds of 5,000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).
• Total throughput / transfer speed is determined by the applied USB 3.2 Gen 1 interface (theor. 5 Gbit/s).
• USB hub can permanently connect multiple external drives.
One card reader – two slots:
• Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,
• SD slot: SecureDigital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / miniSDHC / microSDXC, MMC Micro.
The following flash card specifications are supported by the card reader:
• SD 1.0/1.1 (SD - Secure Digital, up to 2GB).
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).
• MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit).
• Support for SD 3.01 and SD Jukebox App (CPRM function).
• Support for Ultra High Speed Bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speed up to 104 MB/s.
• Support for Hardware ECC function (Error Correction Code) and CRC function (Cyclic Redundancy Check).
• 2 LUN - in file managers, the card reader is displayed as two storage units.
• Support for file formats FAT 12/16/32, NTFS, exFAT (FAT 64).
Other Features:
• The device can be connected during operation thanks to Hot Plug support.
• Full Plug-and-Play support.
• Standby support.
• The high-quality shielded cable guarantees high communication speed and minimal unwanted interference.
• A white LED indicates connection to the computer's USB port.
• Power supply via USB bus - (USB Bus Power).
• Dimensions 84 x 24 x 18 mm.
• Weight 42 g (incl. cable).
• USB cable length 20 cm.
Power Supply / Charging:
• USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered devices (printer, scanner, external 3.5" drive) to all four ports.
• USB-C hub can permanently connect multiple external drives simultaneously.
• Charging mobile devices (including iPad) with a current of up to 1.5A on each of the hub ports. The total charging current (which is distributed among the ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port).
Supported OS:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and newer, Windows Server 2003 / 2008 / 2012 / 2016 and newer (support for all 32- and 64-bit versions of OS Windows), Mac OS X 10.x and higher, Linux with kernel 2.4.x and higher, Android in all versions.
• Note: Drivers are part of the supported operating systems and are installed fully automatically. Other drivers do not need to be installed and are not even available.
Packaging includes:
• SuperSpeed USB Multi Port Hub with fixed 20 cm cable,
• printed installation guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
• packed in a cardboard box with a hanger.
The hub's metal casing is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant, finely textured housing surface resists fingerprints. Rubber pads prevent it from sliding on the table. The permanently installed 20 cm USB cable is ideal for mobile device users.
This compact multiport hub can also handle the permanent connection of multiple external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub also charges phones and tablets with a current of up to 1.5A/5V. This means the hub can easily charge an Android smartphone, Apple iPhone, Apple iPad, etc.
The card reader supports all current versions of SD and microSD cards, including SDXC and microSDXC, with a capacity of up to 2TB. High data transfer speed is ensured by the USB 3.2 Gen 1 interface. The card reader allows simultaneous handling of cards in both slots and direct copying between them.
The USB multi-port hub is the ideal accessory for Ultrabooks with a low number of USB-A ports and no card reader. The hub doesn't even shy away from connecting to phones using an appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard, mouse, and card reader to your phone or tablet.
Input:
• 1x USB 3.2 Gen 1 / SuperSpeed USB Port, USB-A Male connector.
• Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1.
• USB connector with A-type male plug, located on a 20 cm fixed cable.
USB Output:
• 3x SuperSpeed USB Port, USB-A Female connector.
• Support for transfer speeds of 5,000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed).
• Total throughput / transfer speed is determined by the applied USB 3.2 Gen 1 interface (theor. 5 Gbit/s).
• USB hub can permanently connect multiple external drives.
One card reader – two slots:
• Micro SD slot: microSD / microSDHC / microSDXC / TransFlash,
• SD slot: SecureDigital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / miniSDHC / microSDXC, MMC Micro.
The following flash card specifications are supported by the card reader:
• SD 1.0/1.1 (SD - Secure Digital, up to 2GB).
• SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB).
• SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB).
• MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit).
• Support for SD 3.01 and SD Jukebox App (CPRM function).
• Support for Ultra High Speed Bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speed up to 104 MB/s.
• Support for Hardware ECC function (Error Correction Code) and CRC function (Cyclic Redundancy Check).
• 2 LUN - in file managers, the card reader is displayed as two storage units.
• Support for file formats FAT 12/16/32, NTFS, exFAT (FAT 64).
Other Features:
• The device can be connected during operation thanks to Hot Plug support.
• Full Plug-and-Play support.
• Standby support.
• The high-quality shielded cable guarantees high communication speed and minimal unwanted interference.
• A white LED indicates connection to the computer's USB port.
• Power supply via USB bus - (USB Bus Power).
• Dimensions 84 x 24 x 18 mm.
• Weight 42 g (incl. cable).
• USB cable length 20 cm.
Power Supply / Charging:
• USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered devices (printer, scanner, external 3.5" drive) to all four ports.
• USB-C hub can permanently connect multiple external drives simultaneously.
• Charging mobile devices (including iPad) with a current of up to 1.5A on each of the hub ports. The total charging current (which is distributed among the ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port).
Supported OS:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and newer, Windows Server 2003 / 2008 / 2012 / 2016 and newer (support for all 32- and 64-bit versions of OS Windows), Mac OS X 10.x and higher, Linux with kernel 2.4.x and higher, Android in all versions.
• Note: Drivers are part of the supported operating systems and are installed fully automatically. Other drivers do not need to be installed and are not even available.
Packaging includes:
• SuperSpeed USB Multi Port Hub with fixed 20 cm cable,
• printed installation guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
• packed in a cardboard box with a hanger.
What Buyers Are Saying
Ratings and reviews for this product, collected with Loox. Have a product question?
About this product
Axagon HMA-CR3A Metal USB 3.2 Gen 1 Multiport Hub with Three USB-A Ports and a Card Reader
Questions & answers
Will this product fit your setup? Ask the community or read the existing answers.
Ask a questionReview this product with Loox
Sign in with your shop account to post. Reading needs no account.
Loading questions and experiences …
What would you like to know about this product?
No discussion about this product yet. Ask the first question and help others decide.
Discussions are currently unavailable. Try again or open the forum.
Frequently Asked Questions
What are the shipping costs and how long does delivery take?
Standard shipping CHF 8.90 (B-Post, 3–5 business days) or Express CHF 23.50 (Swiss-Express "Mond", 1–2 business days) – Delivery by Swiss Post, within Switzerland only. In-stock products are usually processed within one business day; out-of-stock components are procured within 2–3 business days. Pick-up in Winterthur is free of charge.
Can I also pick up my order?
Yes – free of charge at Sulzerallee 80, 8404 Winterthur, during our opening hours. Please wait for our pick-up confirmation before coming by.
How long is my warranty?
You receive a 3-year warranty on all products purchased from us, starting from the date of delivery. For repair work carried out by us and newly installed spare parts, we provide a 2-year warranty. Report any warranty claims to info@pixelgipfel.ch before returning the item and wait for RMA confirmation.
Can I return a product?
Yes – as a private customer with a delivery address in Switzerland, you have a voluntary right of return for 14 days from receipt: 100% for unopened items, 90% for opened but unused items, and under 85% refund for used items. Excluded are custom builds, personalized products, activated software and license keys, as well as opened products that come into contact with the body (e.g., headphones, headsets, VR glasses). Please register your return in advance at info@pixelgipfel.ch – the refund will be processed within 10 business days after inspection.
What payment methods do you accept?
TWINT, common credit and debit cards, and purchase on account with partial payment option via our partner Heylight. All prices include 8.1% VAT; shipping costs will be displayed in the checkout before the order is completed.
How long does it take to assemble my custom PC?
Once all components are available, assembly, configuration, and functional testing usually take 1–2 business days. If parts are not in stock, an additional 2–3 business days for procurement will apply; for pre-orders or special procurements, it can take up to 30 days – we will inform you of any delays.
Can I cancel my order?
You can usually cancel standard products that have not yet been shipped free of charge – please contact us at info@pixelgipfel.ch. For custom builds and specially ordered products, cancellations depend on the processing status; compensation of up to 20% may be charged for work already carried out and components already ordered.
You may also like
DisplayPort 2.1 Cable
MK730 TKL RGB Mechanical Gaming Keyboard
SmartFlex USB-C 4.0 1.5m self-retracting cable
USB2.0 AM to USB-C Cable
HDMI 2.1 Round Cable
DisplayPort 1.4 Cable
