1 / 12
Network Interface Cards
Axagon ADE-SRC USB-C Gigabit Ethernet Adapter
View reviewsThe compact high-speed AXAGON ADE-SRC adapter easily turns a USB-C 3.1 Gen 1 port into a Gigabit Ethernet 10/100/1000Mbit port. In addition to Gigabit throughput, the network card also offers a wide range of functions including IPv4/IPv6 Checksum...
CHF 15.23
Delivery time: 3–5 working days
- Fast delivery from a Swiss warehouse
- 3-year warranty
- Personal support
-
- Invoice (CH)
Product information
The compact high-speed AXAGON ADE-SRC adapter easily turns a USB-C 3.1 Gen 1 port into a Gigabit Ethernet 10/100/1000Mbit port.
In addition to Gigabit throughput, the network card also offers a wide range of functions including IPv4/IPv6 Checksum Engine for reducing CPU load through checksums, crossover detection and auto-correction, TCP Large Send Offload, support for various Wake-on-LAN function modes, or advanced power management functions.
In modern operating systems (Windows 8.1 and higher), the adapter enables easy automatic installation even without an internet connection.
This Gigabit network card extends the computer with a fast network connection, adds a missing RJ-45 network connector, provides another network card, or replaces a non-functional original network connection.
Thanks to support for all modern versions of Windows, MacOS X, and Linux operating systems, it can be used with any computer, notebook, or ultrabook equipped with a modern reversible USB-C connector. Some smartphones and tablet PCs with the Android operating system, such as the Samsung S9+, can also be easily connected to the internet via Ethernet cable using this adapter.
Input:
• USB 3.1 Gen 1 / USB 3.0 interface, backward compatible with USB 2.0 and USB 1.1.
• Supports transfer speeds of 12 / 480 / 5000 Mbit/s (full / high / super speed).
• USB Type C male connector, located on a 15 cm long cable fixed to the adapter.
Output:
• Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection.
• Supported Ethernet interface transfer speeds 10/100/1000 Mb/s.
• Supported specifications IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T.
• 10/100/1000 Mbit/s auto-detection.
• Support for IPv4/IPv6 packet Checksum Offload Engine (COE) for reducing CPU load including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation.
• Support for TCP Large Send Offload V1 and V2.
• Support for IEEE 802.1P Layer 2 priority encoding & decoding.
• Support for IEEE 802.1Q VLAN tagging.
• Support for IEEE 802.3az EEE (Energy Efficient Ethernet) - power consumption reduction in idle mode.
• Support for Jumbo frame.
• Support for full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control.
• Support for Auto MDI/MDIX - no crossover cables needed due to crossover detection and auto-correction.
• Support for hardware-based Cyclic Redundancy Check (CRC) for detection of transmission errors.
• Support for pair swap/polarity/skew correction.
Other features:
• Full Plug-and-Play and Hot-Plug support.
• CDC-ECM support – for automatic driver installation in various operating systems.
• The adapter is powered via the USB bus (Bus Power) - no additional power supply required.
• Two LED indicators for network activity and connection of the adapter to USB and network.
• Dimensions 61 x 25 x 17 mm, USB cable length 15 cm, weight including USB cable 23 g.
• Uses Realtek RTL8153 chipset.
Support for Wake-on-LAN function in various modes:
• Support for sleep mode and remote wake-up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, and Link Change Wake-Up.
• Support for the ECMA-393 standard proxZzzy® for sleeping hosts for managing sleeping hosts via proxy servers.
• RealWoW! technology support enables remote wake-up via the Internet.
Advanced Power Management Features:
The adapter supports advanced power management, which reduces losses in idle state or during moderate network traffic. In addition, advanced power saving when disconnecting the Ethernet cable is supported.
• Support for Advanced Configuration Power Management Interface (ACPI).
• Support for Power Management Offload (ARP & NS).
• Support for Microsoft Always On Always Connected (AOAC).
• Support for Intel Converged Platform Power Management (CPPM).
• Support for Link Power Management (LPM).
• Support for Operating System-directed Power Management (OSPM).
• Support for IEEE 802.3az EEE (Energy Efficient Ethernet).
Supported OS:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and newer, Windows Server 2003 / 2008 / 2012 / 2016 and newer (support for all 32- and 64-bit versions of OS Windows),
• MacOS X 10.6 and higher,
• Linux with kernel 2.6.14 and higher,
• Android in most versions (ATTENTION - it is necessary to check with the manufacturer of the respective Android device for Ethernet connection support).
The packaging contains:
• USB - Gigabit Ethernet Adapter with a fixed 15 cm USB-C cable,
• printed installation guide CZ/DE/ENG/ESP/FR/HU/IT/PL/RO/RU/SK,
• packed in POS carton.
In addition to Gigabit throughput, the network card also offers a wide range of functions including IPv4/IPv6 Checksum Engine for reducing CPU load through checksums, crossover detection and auto-correction, TCP Large Send Offload, support for various Wake-on-LAN function modes, or advanced power management functions.
In modern operating systems (Windows 8.1 and higher), the adapter enables easy automatic installation even without an internet connection.
This Gigabit network card extends the computer with a fast network connection, adds a missing RJ-45 network connector, provides another network card, or replaces a non-functional original network connection.
Thanks to support for all modern versions of Windows, MacOS X, and Linux operating systems, it can be used with any computer, notebook, or ultrabook equipped with a modern reversible USB-C connector. Some smartphones and tablet PCs with the Android operating system, such as the Samsung S9+, can also be easily connected to the internet via Ethernet cable using this adapter.
Input:
• USB 3.1 Gen 1 / USB 3.0 interface, backward compatible with USB 2.0 and USB 1.1.
• Supports transfer speeds of 12 / 480 / 5000 Mbit/s (full / high / super speed).
• USB Type C male connector, located on a 15 cm long cable fixed to the adapter.
Output:
• Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection.
• Supported Ethernet interface transfer speeds 10/100/1000 Mb/s.
• Supported specifications IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T.
• 10/100/1000 Mbit/s auto-detection.
• Support for IPv4/IPv6 packet Checksum Offload Engine (COE) for reducing CPU load including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation.
• Support for TCP Large Send Offload V1 and V2.
• Support for IEEE 802.1P Layer 2 priority encoding & decoding.
• Support for IEEE 802.1Q VLAN tagging.
• Support for IEEE 802.3az EEE (Energy Efficient Ethernet) - power consumption reduction in idle mode.
• Support for Jumbo frame.
• Support for full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control.
• Support for Auto MDI/MDIX - no crossover cables needed due to crossover detection and auto-correction.
• Support for hardware-based Cyclic Redundancy Check (CRC) for detection of transmission errors.
• Support for pair swap/polarity/skew correction.
Other features:
• Full Plug-and-Play and Hot-Plug support.
• CDC-ECM support – for automatic driver installation in various operating systems.
• The adapter is powered via the USB bus (Bus Power) - no additional power supply required.
• Two LED indicators for network activity and connection of the adapter to USB and network.
• Dimensions 61 x 25 x 17 mm, USB cable length 15 cm, weight including USB cable 23 g.
• Uses Realtek RTL8153 chipset.
Support for Wake-on-LAN function in various modes:
• Support for sleep mode and remote wake-up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, and Link Change Wake-Up.
• Support for the ECMA-393 standard proxZzzy® for sleeping hosts for managing sleeping hosts via proxy servers.
• RealWoW! technology support enables remote wake-up via the Internet.
Advanced Power Management Features:
The adapter supports advanced power management, which reduces losses in idle state or during moderate network traffic. In addition, advanced power saving when disconnecting the Ethernet cable is supported.
• Support for Advanced Configuration Power Management Interface (ACPI).
• Support for Power Management Offload (ARP & NS).
• Support for Microsoft Always On Always Connected (AOAC).
• Support for Intel Converged Platform Power Management (CPPM).
• Support for Link Power Management (LPM).
• Support for Operating System-directed Power Management (OSPM).
• Support for IEEE 802.3az EEE (Energy Efficient Ethernet).
Supported OS:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and newer, Windows Server 2003 / 2008 / 2012 / 2016 and newer (support for all 32- and 64-bit versions of OS Windows),
• MacOS X 10.6 and higher,
• Linux with kernel 2.6.14 and higher,
• Android in most versions (ATTENTION - it is necessary to check with the manufacturer of the respective Android device for Ethernet connection support).
The packaging contains:
• USB - Gigabit Ethernet Adapter with a fixed 15 cm USB-C cable,
• printed installation guide CZ/DE/ENG/ESP/FR/HU/IT/PL/RO/RU/SK,
• packed in POS carton.
What Buyers Are Saying
Ratings and reviews for this product, collected with Loox. Have a product question?
About this product
Axagon ADE-SRC USB-C Gigabit Ethernet Adapter
Questions & answers
Will this product fit your setup? Ask the community or read the existing answers.
Ask a questionReview this product with Loox
Sign in with your shop account to post. Reading needs no account.
Loading questions and experiences …
What would you like to know about this product?
No discussion about this product yet. Ask the first question and help others decide.
Discussions are currently unavailable. Try again or open the forum.
Frequently Asked Questions
What are the shipping costs and how long does delivery take?
Standard shipping CHF 8.90 (B-Post, 3–5 business days) or Express CHF 23.50 (Swiss-Express "Mond", 1–2 business days) – Delivery by Swiss Post, within Switzerland only. In-stock products are usually processed within one business day; out-of-stock components are procured within 2–3 business days. Pick-up in Winterthur is free of charge.
Can I also pick up my order?
Yes – free of charge at Sulzerallee 80, 8404 Winterthur, during our opening hours. Please wait for our pick-up confirmation before coming by.
How long is my warranty?
You receive a 3-year warranty on all products purchased from us, starting from the date of delivery. For repair work carried out by us and newly installed spare parts, we provide a 2-year warranty. Report any warranty claims to info@pixelgipfel.ch before returning the item and wait for RMA confirmation.
Can I return a product?
Yes – as a private customer with a delivery address in Switzerland, you have a voluntary right of return for 14 days from receipt: 100% for unopened items, 90% for opened but unused items, and under 85% refund for used items. Excluded are custom builds, personalized products, activated software and license keys, as well as opened products that come into contact with the body (e.g., headphones, headsets, VR glasses). Please register your return in advance at info@pixelgipfel.ch – the refund will be processed within 10 business days after inspection.
What payment methods do you accept?
TWINT, common credit and debit cards, and purchase on account with partial payment option via our partner Heylight. All prices include 8.1% VAT; shipping costs will be displayed in the checkout before the order is completed.
How long does it take to assemble my custom PC?
Once all components are available, assembly, configuration, and functional testing usually take 1–2 business days. If parts are not in stock, an additional 2–3 business days for procurement will apply; for pre-orders or special procurements, it can take up to 30 days – we will inform you of any delays.
Can I cancel my order?
You can usually cancel standard products that have not yet been shipped free of charge – please contact us at info@pixelgipfel.ch. For custom builds and specially ordered products, cancellations depend on the processing status; compensation of up to 20% may be charged for work already carried out and components already ordered.
You may also like
DisplayPort 2.1 Cable
MK730 TKL RGB Mechanical Gaming Keyboard
SmartFlex USB-C 4.0 1.5m self-retracting cable
USB2.0 AM to USB-C Cable
HDMI 2.1 Round Cable
DisplayPort 1.4 Cable
